Automatic Mild Steel Feeder for Feeding Powder Materials
|FOB Price:||US $2,500-3,000 / Set|
|Min. Order:||1 Set|
|Min. Order||FOB Price|
|1 Set||US $2,500-3,000/ Set|
- Model NO.: series
- Certification: ISO9001
- Customized: Customized
- Application: Metal Cutting Machine, Metal Processing Machinery Parts, Metal forging Machinery, Metal Engraving Machinery, Metal Coating Machinery, Metal Casting Machinery
- Model: Igs-3X
- Transport Package: Wooden Case or Customized
- Origin: China
- Condition: New
- Standard: Great Wall
- Material: Metal
- Feeding Way: Double-Hopper Powder Feeder with Gas
- Trademark: igood
- Specification: 450*320*130/set
- HS Code: 84249090
It is a new type of powder feeder, featured by accurate feeding, clear and convenient adjusting powder amount, safe and reliable.
With the development of metal material surface modification technology, it has become wider and wider for laser and plasma cladding of application in the industry. To meet the needs of the metal surface laser cladding and plasma beam cladding strengthening technology and technique, overcome the deficiency in the existing powder feeder, we have succeeded in developing the third generation of roller-type accurate powder feeder. It is well made, featured by good continuity in feeding, high precision, simple structure, and long service life, especially applicable for powder adding hardening process in the laser cladding, plasma cladding and hardfacing wear-resisting composite plate.
1 According to the circuit schematic access to 220V,50HZ power. Using button or I/O interface to control start & stop. Adjust feeding rate by regulating armature voltage.
2 Under the same voltage for different components and different types of alloy powder, the voltage value displaying will have a little discrepancy. We suggest making a graph of voltage and actual feed rate after using every type alloy powder.
3 The air inlet pipe is furnish with safety valve whose setting pressure is 0.5 Mpa. When the air pressure reach or above 0.5Mpa, the safety valve can deflate automatically to keep powder feeder running under a normal pressure.
4 The principle of powder feeder's electric circuits and air circuits: aerating before power-on,power-off before cutting off air circuits, avoid the pipe blocking and canister under pressure in a long term.
5 See attached map of electric circuits and air circuits connection .
Powder feeder Air Circuit Sketch Map:
1 Before using,alloy powder should be baked at 100~150ºC for 30 to 40 minutes. After sifting with 40-60 mesh sieve,put them into powder feeder,but the powder must not bury the air outlet,then keep top cap tightly closed( the top cap mustn't install when gravity send powder ).
2 Open the gas bottle,adjust the air outlet pressure to 0.3-0.5 MPa, the powder feeding pressure shall not exceed the specified value.
3 The manufacturing process and particle size range of powder will influence the feeding accuracy: atomized spherical powder and small particle size range alloy powder with high precision.
4 When the powder feeder leave the factory, all the parameters have been well-adjusted, and user must not dismount arbitrarily.
5 If not use powder feeder for a long term,remember to empty all the powder,and using clean and dry airflow to clean it up.
Note: If using gravity to feed powder, no need gas circuit and top cap. Keep material cavity open. If using gravity for a long time, clean the whole path of powder with dry high-pressure gas every two month.
|1||Powder feeder(including safety valve)||1||Indivisible|
|3||Air tube joint||1|
|9||Plastic tube||2||Φ8,each 1.5meters|
|Voltage adjustment (V)||0~90||0~24||0~24|
|Powder control||Adjust armature voltage||Adjust armature voltage||Adjust armature voltage|
|Applicable grain size(μm)||80-280||80-280||400-800|
|Feeding gas pressure(MPa)||0.2||0.2||0.2|
|Feeding gas flow rate(m3/h)||0.1~0.4||0.1~0.4||0.1~0.4|
|Feeding gas limited pressure(MPa)||≤0.4||≤0.4||≤0.4|
1. Engineers are available to provide technically machinery services overseas.
2. All the mahines enjoy one-year warranty service.
3. 24 hours service both online and on telephone.